Floor Trims
Transition strips reduce the risk of accidents for pedestrian traffic by providing a safe link between floorcoverings. A transition strip can also provide a safe joint where wheeled traffic is expected and ensures that trolleys can move freely between different types and heights of floorcovering, reducing the risk of trolleys tipping over.
Anodised aluminium skirtings provide a modern, streamlined finish for a variety of commercial environments.
Aluminium Skirting & Capping's Luxury Trims
LTS Luxury Trim System is a premium solution for the neat finishing of junctions between flooring materials.
LTS is available in a range of different heights and is therefore ideal for use with a variety of floorcoverings; wood, wood laminate, carpet, carpet tiles and ceramics.
The solid brass profiles are available in six finishes to complement the high end metal finishes seen in exclusive environments such as premium door furniture and luxury floor finishes.
The profiles are available in either a ramp or twin top configuration with a choice of bases and heights to suit a wide range of floorcoverings. The tops clip into the bases to accommodate floorcoverings between 8mm and 16mm thick.
SFBR37/AFT398
SFBR37/AFT398
37mm Ramp Top profile. For use with 8mm floorcoverings.
SFBR37/AFT3916
SFBR37/AFT3916
37mm Ramp Top profile. For use with 16mm/8mm floorcovering.
SFBR37/AFT3912
SFBR37/AFT3912
37mm Ramp Top profile. For use with 12mm/4mm floorcoverings.
Multi Purpose Trim
A range of multi-purpose trims designed to provide a neat join between different floorcoverings and to protect the edges of the floorcoverings.
Available in aluminium, brass and stainless steel.
Three base options available: solid base for straights; pre-punched base with tabs and fixing holes for on-site curving; perforated base with fixing holes for straights and use with ceramics.
Multi-purpose trims can also be used as recessed matwell frames.
Aluminium Multi-Purpose
3 base options - solid, perforated & pre-punched.
Aluminium Multi-Purpose
3 base options - solid, perforated & pre-punched.
Stainless Steel Multi-purpose
1 base option - perforated.
Stainless Steel Multi-purpose
1 base option - perforated.
Brass Multi-purpose
2 base options - perforated & pre-punched.
Brass Multi-purpose
2 base options - perforated & pre-punched.
Wetroom Transition Strips
Wetroom transition strips are designed to be incorporated into the resilient flooring in wetrooms and shower areas in order to contain water and prevent it encroaching into dry areas.Gradus WTS wetroom transition strips are tested for slip-resistance in barefoot areas and are designed to be safe and comfortable underfoot whilst allowing wheelchair access.
WTS1
WTS1 Wetroom Transition Strip
Pvc - 70mm visible top, gauge 3mm
WTS2
WTS2 Wetroom Transition Strip
Pvc - 70mm visible top, gauge 3mm
WTS3
WTS3 Wetroom Transition Strip
Pvc - 40mm visible top, gauge 3mm
Threshold Trim
Threshold trims are used to join floorcoverings of the same height and are commonly used at door interfaces or to define changes in areas.
TH382
TH382
Aluminium adjustable height profile
TH495
TH495
PVC-u/pvc - joins 5mm carpet and carpet tile.
TH383
TH383
Aluminium adjustable height profile
CET5
CET5
Flexible pvc - joins 5mm carpet and carpet tile.
Feather edge trims
Feather edge trims are used to finish the raw, exposed edge of floorcoverings and provide a safe transition to the sub-floor.
Feather edge trims are typically used at the junction with terazzo or stone floors.
Available in either aluminium or pvc to suit resilient floorcoverings up to 3mm thickness.
TH382
TH382
Aluminium adjustable height profile
TH495
TH495
PVC-u/pvc - joins 5mm carpet and carpet tile.
TH383
TH383
Aluminium adjustable height profile
CET5
CET5
Flexible pvc - joins 5mm carpet and carpet tile.
Ramp Edge Trims
Ramp edge trims are used to join floorcoverings such as carpet or resilient flooring to floorcoverings of a lower height e.g. stone, concrete or resilient flooring.
They are designed to ensure a safe transition between floorcoverings whilst protecting the edges to minimise the risk of damage and to ensure that the edges do not lift and become a trip hazard.
Aluminium Ramp Edge
Aluminium Ramp Edge profiles join floorcoverings between 2.5mm and 22mm to the surrounding floorcoverings.
PVC Ramp Edge
PVC ramp edge joins floorcoverings between 4mm and 9mm to the surrounding floorcovering
Edge Trims
A range of edge trims used to form a joint between different types of floorcovering such as carpet, carpet tiles, wood laminate and resilient floorcoverings. Provides protection to the edges of the floorcoverings whilst providing an attractive feature strip.
Available in PVC-u and aluminium.
Aluminium trim TA8 is ideal as a day joint profile for resin floors as it is suitable for on-site polishing and finishing.
TA6
TA6
Aluminium - used to join 3.5mm and 5mm floorcoverings.
GT61M
GT61M
Metallic pvc, curvable - for use with 6mm-8mm floorcoverings.
ET367
ET367
Aluminium - used to join 6mm and 2.5mm floorcoverings.
PET276
PET276
Pvc - for use with 6mm-8mm floorcoverings.
Transition T Profile
Transition T profiles are used for joining different floorcoverings of the same, or slightly differing, heights. They are available in anodised aluminium and brass. The design of the T profiles allows slight imperfections in joints and cuts to be hidden, and enables a gap between floor finishes to be incorporated during installation to allow for natural expansion in flooring materials such as ceramics and wood. Profiles can be curved on-site for shaped edges and inlays.
T profiles are fitted after the floorcoverings have been installed, making them ideal for use when the installation of the floorcoverings is undertaken by different trades (e.g. ceramic contractors and flooring contractors) where the trims cannot be fixed until both floors have been completed.
TP290F4
TP290F4
Anodised aluminium - 14mm width.
TP291F4
TP291F4
Anodised aluminium - 20mm width.
TP295F4
TP295F4
Anodised aluminium - 24mm width.
TP290F7
TP290F7
Polished brass - 14mm width.
TP293F4
TP293F4
Anodised aluminium - 28mm
Square Edge Trim
Gradus square edge floor trims are typically used with carpet, carpet tile, wood and wood laminate at the junction with other flooring materials such as other carpets, ceramics and wood.
Square edge trims provide a neat finish to floorcoverings, protecting the edges from damage and also hiding any slight imperfections in joints or cuts.
Gradus square edge trims are available in natural and anodised aluminium.
Selected square edges are also available with pre-punched bases and tabs for on-site curving.
ACT48
ACT48
Aluminium - for use with 8mm carpet & carpet tile.
ET804EBF4
ET804EBF4
Anodised aluminium – formable, for use with 3mm floorcoverings.
ET805EBF4
ET805EBF4
Anodised aluminium - formable, for use with 7mm floorcoverings.
Also Available in different sizes.
ET210EBF4
ET210EBF4Anodised aluminium - formable, for use with 7mm-8mm floorcoverings.
ET212EBF4
ET212EBF4
Anodised aluminium - formable, for use with 9mm-10mm floorcoverings.
ET804
ET804
Anodised aluminium - for use with 3mm floorcoverings.
ET806
ET806
Anodised aluminium - for use with 5mm floorcoverings.
Also Available in different sizes.
ET210
ET210
Anodised aluminium - for use with 7mm-8mm floorcoverings.
ET212
ET212
Anodised aluminium - for use with 9mm-10mm floorcoverings.
Trans-Edge Heavy-Duty Trims
Trans-Edge trims have been designed for use in the most demanding environments where frequent heavy foot and trolley traffic can be expected.
Available in a choice of gauges, Trans-Edge trims are manufactured in high quality aluminium to withstand repeated heavy traffic impacts. The incorporation of Gradus Interior insert material provides a slip-resistant surface as well as allowing either a complementary or contrasting colour choice to blend with the surrounding floor finishes. Inserts are fitted on site to allow concealed fixings.
For use with heavy foot and trolley traffic.Gradus Trans-Edge trims reduce the risk of accidents for pedestrian and trolley traffic by providing a safe link between floorcoverings.
Trans-Edge profiles are designed for use in severe pedestrian and trolley traffic applications e.g. railway stations, airports, transport interchanges, department stores, high street shops and hospitals.
A choice of profiles is available for joining floorcoverings on different levels (ELAR) or of similar heights (ELACS).
Profiles comprise an aluminium base with pvc slip-resistant inserts.
ELAR1830
ELAR1830
Ramp for use with 18.5mm floorcoverings.
ELAR830
ELAR830
Ramp for use with 5.5mm floorcoverings
ELAR1250
ELAR1250
Ramp for use with 12mm floorcoverings.
ELACS5040
ELACS5040
Flat profile for use with 4mm floorcoverings.
Also available in other sizes.
ELAR950
ELAR950
Ramp for use with 8mm floorcoverings.
ELAR1550
ELAR1550
Ramp for use with 15mm floorcoverings.
Specialist Floor Trims Solutions
Gradus offers a wide selection of specialist floor trims that provide various solutions to common problems encountered where different floorcoverings are used together.
Cover Strips
Cover StripsUsed to join floorcoverings of a similar thickness.
20mm brushed stainless steel, 1mm thick.SCSM471 is a 20mm wide, brushed finish stainless steel cover strip which provides a bridge to cover joints between floorcoverings of the same or slightly differing heights e.g. carpet and carpet tiles.
It ensures that joins are neat and safe as well as protecting the exposed edges of the floorcoverings.
Cover strips are typically used at door thresholds.
Suitable for use in heavy traffic environments.
SCSM471 is supplied pre-drilled (centrally) and countersunk.
Joint Trim
Joint Trim
A range of anodised aluminium floor trims used to provide a neat join where floorcoverings of the same height meet.
Joint trims protect the edges of the floorcoverings and provide a safe transition between them.
Joint profiles are available in two finishes - Polished and Silver Anodised - and are available to suit floorcoverings, such as thin gauge carpet and resilient flooring, of 3mm and 4mm in height.
Profiles are available with solid flanges for straight laying, or with pre-punched tabs and fixing holes for on-site curving.
JT365
Aluminium - polished or silver anodised - for use with 3mm floorcoverings.JT365 is an aluminium floor trim used to provide a neat join where floorcoverings of the same height meet. It protects the edges of the floorcoverings and provides a safe transition between them. Available in both Polished (F3) and Silver Anodised (F4) finishes, JT365 is suitable for use with resilient floorcoverings of 3mm thickness.
JT365 is supplied pre-drilled and countersunk.
JT365 is also available with a tabbed base for on-site curving
Finishing Trim
Finishing trims are designed to form a neat and clean finish to the edge of a floorcovering where it either finishes or meets another floorcovering.
Finishing trims protect the raw edge of the floorcovering, thus extending the life of the floorcovering. In addition they ensure a safe transition and prevent the edge of the floorcovering from lifting and becoming a trip hazard.
Finishing trims are available in aluminium, anodised aluminium and bronze.
ACT61
Aluminium - for use with 5mm carpet/carpet tile.ACT61 is an aluminium finishing trim used to form a neat and clean finish to the edge of a carpet tile or carpet where it either finishes or meets another floorcovering such as vinyl.
Aluminium Cove Formers
Aluminium cove formers are designed for use with resilient and LVT flooring to allow the flooring material to be coved up the wall to create a neat finish where the floor meets the wall.
Gradus aluminium cove formers are supplied in a range of anodised finishes to complement resilient and LVT flooring.
CVA870IW
Anodised aluminium – for use with 2.5mm resilient & LVT flooring.Gradus CVA870IW is an aluminium cove former designed to work with 2.5mm resilient and LVT flooring to allow it to be coved up the wall.
It is supplied in 2.50m lengths in a range of anodised finishes: Silver, Bronze and Sand.
Floor Repair Trim
An aluminium floor trim designed to repair resilient floorcoverings where welded joins have failed. It utilises strips of the same floorcovering as an insert to provide an unobtrusive repair.
Ideal for use in environments that endure heavy wheeled and pedestrian traffic. Can also be installed at door interfaces to provide robust transition.
AVR5020
Aluminium trim for repairing failed welded joins in resilient floorcoverings.AVR5020 is an aluminium floor trim designed to repair resilient floorcoverings where welded joins have failed. It utilises strips of the same floorcovering as an insert to provide an unobtrusive repair.
Ideal for use in environments that endure heavy wheeled and pedestrian traffic.
AVR5020 can also be installed at door interfaces to provide robust transition.
Nap Trims
Nap trims provide a neat edge or join between different types of floorcovering such as carpets, vinyl and ceramic tile.
Certain nap trims (ANT355, CG1042 & BCT16) are also commonly used as 'binder' bars in conjunction with a stair edging.
ANT27
Aluminium - for joining carpet to resilient flooring.
Heavy Duty Ramp
A heavy duty aluminium ramp for providing a safe transition between flooring materials of different heights e.g. ceramic tile and vinyl. Can accommodate height differences in floorcoverings between 8.5mm and 15mm.
Suitable for use in heavy traffic environments, and is ideal for use in environments subject to wheeled traffic e.g. wheelchairs and shopping trolleys.
AR268
Provides transition between flooring materials of different heights
Dual Trims
Dual edge used to provide an neat finish to the edge of raised areas such as tiered seating in lecture theatres, or raised display areas in retail environments. It allows floorcoverings to be neatly finished both on the vertical and horizontal surfaces.
It is designed for use with resilient floorcoverings and thin gauge carpets.
DT50
For use with 3.5mm carpet or resilient flooring.
Get a Free Quote
This is a Paragraph. Click on "Edit Text" or double click on the text box to start editing the content.